
Worn pads leave swirls instead of shine
When a buffer pad clogs or wears thin, the machine pushes dirt around instead of lifting it, leaving swirls, haze, and patchy floors. Fresh pads restore a clean finish without buying a new machine.
- βͺΒ Β Swirls and haze.
- βͺΒ Β A matted, worn pad drags residue across the floor instead of lifting it, leaving cloudy swirls.
- βͺΒ Β Clogged fibers.
- βͺΒ Β Oil, wax, and grit pack into old fibers so the pad stops gripping and slides instead.
- βͺΒ Β Wrong pad for the job.
- βͺΒ Β Using one pad to scrub, polish, and strip mixes dirt and wax and dulls the finish.
- βͺΒ Β Thin, uneven wear.
- βͺΒ Β Bare spots in a pad press the driver against the floor and can scuff the surface.

Three colors for scrub, polish, and strip
The set pairs a white buffing pad for shine, a red scrubbing pad for washing, and a black stripping pad for heavy cleaning, all on hook-and-loop backing that sticks to the pad driver.

Soft white pad brings up a smooth, even shine on finished floors.
Medium red pad lifts dirt and washes the floor with cleaning solution.
Dense black pad handles heavy stripping and heavy-duty soil.
Loop backing attaches to the pad driver and pulls off fast for rinsing or swapping.
Dense non-woven fiber, layered and bonded
Each pad is made of bonded non-woven fiber that flexes with the floor, with a looped back that grips the driver without adhesive.

- βͺΒ Β Bonded non-woven fiber.
- βͺΒ Β Resists tearing under pressure and flexes to follow uneven floor texture.
- βͺΒ Β Layered density by color.
- βͺΒ Β White is softest for buff, red is medium, black is densest for stripping.
- βͺΒ Β Looped backing.
- βͺΒ Β Sticks to a hook pad driver and releases for rinsing without glue.
- βͺΒ Β Even edge trim.
- βͺΒ Β A bound edge keeps fibers from fraying as the pad spins.
Stick on, choose a color, rinse after use
Swap pads in seconds on a common hook pad driver; no tools or adhesives.
Check your pad driver diameter and match it to these round pads before ordering.
Press the looped back onto the hook driver until it sits flat and centered.
Use red to scrub, white to buff, black to strip, and keep pads for separate jobs.
After use, rinse the pad and let it air dry flat before the next clean.

What you get, in plain numbers
General dimensions for a universal round pad set; measure your pad driver before ordering.
| Specification | Value |
|---|---|
| Product | Replacement Round Floor Buffer Pad Set, 3 Colors |
| Pads | White buffing, red scrubbing, black stripping |
| Backing | Hook-and-loop loop backing |
| Fit | Common round floor buffer pad drivers; measure driver diameter |
| Material | Bonded non-woven fiber |
| Includes | Colored round pads; adapter disk where shown |
| Warranty | 30-day replacement on defects |
Note: Pad diameter varies by machine; measure the existing pad driver before ordering. This is a generic compatible pad set, not a branded original, and the buffer machine itself is not included.
Three ways to handle a dull floor
Same cloudy floor, three choices. Here is how they line up.
| At a glance | This product | Alternative |
|---|---|---|
| Cost | Low: replacement pads | High: a whole new buffer machine |
| Jobs | Scrub, buff, strip in colors | Reuse one worn pad for everything |
| Fit | Stick on with hook-and-loop | Stick on with glue or tape |
No surprises in the pack
You receive the pad set; the buffer machine and pad driver are not included.
| Specification | Value |
|---|---|
| Product | Floor Buffer Pad Set |
| Includes | White, red, black round pads; adapter disk |
| Backing | Hook-and-loop loop backing |
| Material | Non-woven bonded fiber |
| Fit | Common round drivers; measure diameter |
| Warranty | 30-day defect replacement |
A white, red, and black round pad set with hook-and-loop backing for scrubbing, buffing, and stripping floors.
Buffer machine and pad driver are not included; measure your driver diameter before ordering.
Keep pads clean and shaped
Simple care stretches pad life and protects the floor.
- βͺΒ Β Rinse after each use.
- βͺΒ Β Wash out dirt and solution so fibers do not clog between jobs.
- βͺΒ Β Air dry flat.
- βͺΒ Β Lay pads flat to dry instead of crumpling to keep them true.
- βͺΒ Β Separate job colors.
- βͺΒ Β Keep scrub, buff, and strip pads apart so wax and dirt do not cross over.
- βͺΒ Β Replace when matted.
- βͺΒ Β Swap a pad once fibers thin or pack hard instead of polishing.

They suit common round floor buffer drivers; measure your driver diameter and match it before ordering.
No. You receive the replacement pads only; the machine and pad driver are sold separately.
White buffs to shine, red scrubs and washes, and black strips heavy soil; keep each color for its own job.
Looped backing sticks to a hook pad driver; press on centered and pull off to rinse or swap.
Rinse after use, wring gently, and air dry flat; replace once the fibers are matted or thin.
- βͺΒ Β White buff, red scrub, black strip pads for a full floor-care routine.
- βͺΒ Β Hook-and-loop backing sticks to a common round pad driver.
- βͺΒ Β Rinse and air dry to stretch pad life.
- βͺΒ Β Machine and driver not included; measure diameter first.
Swap fresh colored pads onto your existing driver and scrub, buff, and strip without a new machine. Measure your driver and order the set.





Reviews
There are no reviews yet.