A TV on a stand wastes floor space and gathers clutter
Leaving a TV on a cabinet takes up floor space, collects dust under it, and leaves cables dangling. Mounting it flush on the wall frees the surface and gives a clean, centered view.
- βͺΒ Β Wasted floor space. A cabinet and TV stand take up room that could be used.
- βͺΒ Β Clutter underneath. Remotes, boxes, and cables pile up under a stand.
- βͺΒ Β Poor viewing height. A low stand forces neck strain instead of eye-level viewing.
- βͺΒ Β Dust and scratches. A cabinet top collects dust and risks knocks.
Holds the TV close to the wall, centered and secure
The bracket fixes to the wall, the TV arms lock onto the rails, and the set sits low-profile against the wall for a clean look and steady view.
Sits close to the wall for a slim, flush appearance.
Fits common VESA hole patterns; verify your pattern first.
Made for common 32 to 55 inch flat-screen TVs.
Comes with bolts, washers, level, and drilling template.
Powder-coated steel with security screws
The bracket is rigid steel with a matte powder coat, VESA mounting holes, security screw slots, and a small level for a straight fit.
- βͺΒ Β Steel construction. Rigid plate and rails hold the TV steadily.
- βͺΒ Β Powder coat. Matte finish resists scratches and rust.
- βͺΒ Β Security screws. Lock the TV onto the rails so it cannot lift off.
- βͺΒ Β Built-in level. Helps you set the bracket straight on the wall.
Mark, fix, hang, lock
Plan the stud or solid-wall fix before drilling and mounting.
Confirm your TV hole pattern and weight against the mount first.
Use the template to mark holes, then fix the plate to a stud or solid wall.
Attach the arms to the TV, then slot it onto the wall rails.
Tighten the security screws and bundle cables out of view.
General specs, verify before mounting
Typical values for a generic universal fixed mount; confirm VESA pattern, size, and wall type before drilling.
| Specification | Value |
|---|---|
| Product | Fixed Low-Profile TV Wall Mount Bracket |
| Size range | Common 32-55 inch flat-screen TVs |
| Mount type | Fixed, low profile, close to wall |
| VESA | Compatible with common patterns; verify yours |
| Material | Powder-coated steel |
| Includes | Bracket, hardware, level, drilling template |
| Warranty | 30-day replacement on defects |
Note: This is a generic universal mount, not a branded original. Confirm your TV VESA hole pattern, screen size, and weight limit, and fix only to a stud or solid wall; the TV is not included. Use proper wall anchors for masonry and check load before hanging.
Stand versus wall mount
Same TV, two placements. Here is how they line up.
| At a glance | This product | TV on a stand |
|---|---|---|
| Space | Frees floor and cabinet space | Takes up cabinet area |
| Look | Flush, centered, tidy | Cluttered underneath |
| Cables | Tucked out of view | Dangle under the stand |
No surprises in the pack
You receive the mount and hardware; the TV and wall are not included.
| Specification | Value |
|---|---|
| Product | Low-Profile TV Wall Mount |
| Includes | Bracket, bolts, washers, level, template |
| Type | Fixed, low profile |
| Range | 32-55 inch, common VESA |
| Material | Powder-coated steel |
| Warranty | 30-day defect replacement |
A fixed low-profile bracket with full hardware to mount a flat-screen TV on the wall.
Verify VESA pattern, size, and weight first; fix to a stud or solid wall; TV sold separately.
Mount safely and keep it straight
Safe mounting habits prevent a loose TV.
- βͺΒ Β Find studs. Fix the plate to wall studs or a rated solid wall, not hollow drywall alone.
- βͺΒ Β Use the level. Check the bracket is level before tightening all bolts.
- βͺΒ Β Tighten security screws. Lock the TV so it cannot slide off the rails.
- βͺΒ Β Bundle cables. Tie cables back so they do not pull on the TV.
It fits common 32-55 inch TVs with common VESA patterns; measure the four mounting holes on the back of your TV and compare before ordering.
No. You receive the mount and hardware; the TV is sold separately.
Fix to wall studs or a rated solid backing; use proper masonry anchors on brick, and never hang on unsupported hollow drywall.
This is a fixed low-profile mount that sits close to the wall; it does not tilt or swivel.
Confirm the rated weight in the pack against your TV before hanging; when in doubt choose a heavier-rated mount for safety.
Reviews
There are no reviews yet.